Your HALO Home Smart Light can be controlled from your HALO Home App or HALO Home Controllers like the Accessory Switch, Accessory Dimmer*, Anyplace Dimmer* or Scene Keypad*).
In this Quick Start Guide you will:
- Pair your installed HALO Home Smart Light to the HALO Home App.
- Learn additional system and lighting features
NOTE:
- While HALO Home lights can be wired to standard ON-OFF switches, they prefer constant power and to be controlled wirelessly.
Avoid accidental factory resets by installing with HALO Home Controllers: Accessory Switch or Accessory Dimmer.
Do not wire to any other manufacturer's dimmers. - HALO Home fixtures were designed to come on when power is restored. This setting was developed as a safety measure to ensure adequate light in case of wireless networking delays after a power outage.
I. Pair your HALO Home Smart Light
1. Install the fixture
(See enclosed instruction sheet.)
Once powered, your light will:
- Turn ON at full brightness (100%) & warm white (3000K) color temperature
- Flash twice to indicate it is ready to be paired
2. Create your Account
- Download the HALO Home app and register
Need help getting started? ►
Already a user? Skip to the next step:
3. Add your Smart Light
Note: Make sure your mobile device’s Bluetooth is turned on and within 35-ft of the light.
- Tap the menu button ( ☰ )
- Navigate to "Devices" and tap the " + " icon
(The app will scan for your installed, unpaired devices).
Installing a bunch of HALO Home products? Be sure to read our Installation Guide ►
- Select your Smart Light and click "Add" to complete the pairing process.
- The connected light blinks once to indicate it has been paired.
Now you can:
-
Add your light to a Group ►
-
Set up a Schedule ►
-
Set up a Scene ►
(Sets brightness and color temp where you need it.)
II. Additional Smart Light Information
Override lighting manually (temporary)
To manually turn on the HALO Home Smart Light(s) without using the HALO Home App or Controllers, cycle power to the light one time. The lighting will return to its last known ON level until it receives the next HALO Home App, Controller, or voice command.
Reset your HALO Home Smart Light to its factory settings ►
Dimming
- HALO Home Smart Lights will dim from 100% to 5%
- Dimming must be done either with the app or with HALO Home Controllers like the Accessory Dimmer, Anyplace Dimmer, or Scene Keypad).
*Do not use with any other manufacturer's dimmers.
Adjusting Color Temperature
Use the mobile app to adjust light from warm white to cool daylight (2700K - 5000K).
(Floodlights are 3000K-5000K)
Power cycle behavior
- An unpaired HALO Home Smart Light will turn lighting ON to 100% and will flash twice if power is cycled.
- A paired HALO Home Smart Light will return to its last saved ON dim level (If the lighting was OFF previous to the power cycle, lighting will turn ON when power is restored)